Pricing Guide
How Much Does Bond Cleaning Cost in Darwin?
Bond cleaning in Darwin typically costs $290 to $500+, depending on property size and condition — from $290 for a studio or one-bedroom unit up to $500+ for a four-bedroom home. Add-ons like carpet steam cleaning start from $80. Every quote is confirmed upfront before work begins.
2026 Darwin Rates
Bond Cleaning Prices by Property Size
These reflect current Darwin market rates for a standard bond clean. Your final price is confirmed at quote based on the actual condition of your property.
| Property Size | Bond Clean (From) | Typical Duration |
|---|---|---|
| Studio / 1 Bedroom | $290 | 2–3 hours |
| 2 Bedroom | $350 | 3–4 hours |
| 3 Bedroom | $390 | 4–6 hours |
| 4+ Bedroom | $500+ | 6–8+ hours |
Add-ons: carpet steam cleaning from $80 · window cleaning, mould treatment and pressure washing quoted on request. See our full services breakdown.
Pricing Factors
What Affects Your Final Price
The size-based prices above are a starting point. Four things determine where your actual quote lands.
Property Size
More rooms and bathrooms mean more surface area and more time — the single biggest factor in every quote.
Condition
Heavy grease, wet-season mould, or a property that hasn’t been deep-cleaned in a while takes longer and costs more.
Furnished vs Empty
Furniture and belongings still in place slow the clean down compared to an empty property.
Add-Ons Needed
Carpet steam cleaning, mould treatment, pressure washing and window cleaning are quoted separately from the base clean.
What’s Included in the Base Price?
Every price above covers the full REINT-standard bond clean — kitchen, bathrooms, bedrooms, living areas and internal windows. Carpet steam cleaning, mould treatment, pressure washing and hard-to-reach window cleaning are quoted separately as add-ons. See the complete breakdown of what’s included versus what costs extra.
See Included vs Add-On Services →How Darwin Compares
Is Bond Cleaning More Expensive in Darwin?
Not really. Here’s how Darwin pricing stacks up against the rest of Australia.
Nationally, a standard 2-bedroom bond clean typically costs $250–$450, and a 3-bedroom home usually falls between $350–$650. Our Darwin pricing — $350 for a 2-bedroom and $390 for a 3-bedroom — sits comfortably within that national range, not above it.
What genuinely does push prices up in the NT is wet-season condition. Properties cleaned during or after the wet season (roughly December–April) often need extra attention for mould around bathroom silicone and window seals — a factor most interstate cost guides don’t account for, because it’s specific to tropical climates. We factor this into quotes honestly rather than surprising you with it on the day.
Get It Right First Time
How to Get an Accurate Quote
Tell Us the Real Size
Bedrooms, bathrooms, and whether it’s a unit or house. Guessing low just means a price change on the day.
Be Honest About Condition
Mention any mould, heavy grease, or areas that haven’t been cleaned in a while — it helps us quote accurately upfront.
Check Your Lease for Add-Ons
See if carpet cleaning is required. Mention it when booking so it’s included in one itemised quote, not a surprise later.
Pricing Questions
Cost Guide FAQs
Why do bond cleaning quotes vary so much between companies?+
Mostly because “bond clean” means different things to different companies — some quotes only cover a basic surface clean, others include the full REINT checklist with oven, windows and skirting boards. Always check exactly what’s included before comparing two prices, since the cheaper quote often excludes items you’ll need anyway.
Is the cheapest bond cleaning quote the best choice?+
Not usually. A quote that’s significantly below market rate often means shorter time on-site, fewer inclusions, or no guarantee — which risks a failed inspection and the cost of doing it again. A mid-range quote backed by a bond-back guarantee is typically better value overall.
Does carpet cleaning cost extra?+
Yes, carpet steam cleaning is quoted separately from the base bond clean, starting from $80 depending on room count. Many Darwin leases require it as a separate line item with its own receipt. See our carpet cleaning page for details.
Will I be charged extra on the day if the property is dirtier than expected?+
We confirm your price before starting, based on the size and condition you describe when booking. Being upfront about condition when you request your quote — mould, heavy grease, how long it’s been since a deep clean — is what keeps the final price matching the quoted price.
Do I need to pay before or after the clean?+
Payment terms are confirmed when you book — ask us directly for our current process. Either way, your price is agreed and itemised upfront, so there’s no ambiguity about what you’re paying for.
How can I get the most accurate quote possible?+
Give us the real property size, mention any problem areas honestly, and check your lease for required add-ons like carpet cleaning before you call. See our full bond cleaning checklist to understand exactly what’s being quoted for.
Get Your Exact Price, Not an Estimate
Tell us your property size and we’ll give you a firm, itemised quote before we start — bond-back guarantee included.